Can lanthanum doping enhance catalytic performance of silver in direct propylene epoxidation over NaMoAg/SiO_2?

In the attempt to reduce surface free energy of silica to improve interaction of silica with silver, silica was doped by different amounts of low surface energy lanthanum, La_2O_3, through impregnation. The doped and undoped silica were used as supports for preparation of Na/Ag/Mo/La_2O_3-SiO_2 catalysts. Catalytic performances of the catalysts were evaluated in direct epoxidation of propylene(DPO) using molecular oxygen under atmospheric pressure and without adding hydrogen. Adding 5 wt%La to the Na/Ag/Mo/SiO_2 catalyst improves both the catalysts electivity in DPO and its stability over 20h of time-on-stream.The characterization results show that La_2O_3 species interact strongly with silver particles on the silica surface which result in significant improvement in the dispersion profile of silver and marked decrease in the size of silver nanoparticles(AgNPs). The estimated mean diameter of AgNPs is ca. 4.0 nm in Na/Ag/Mo/5 wt%La_2O_3-SiO_2, which is smaller than that(53.9 nm) found in Na/Ag/SiO_2. The presence of subnanometer AgNPs on Ag/La_2O_3-SiO_2 prior addition of MoO_3 and NaCl to the sample can enhance the mutual electronic synergism between Ag, MoO_3 and Na for selective production of propylene oxide.     

Study on estimating electric potential in space between parallel electrodes

We have been studying on estimating distribution of permittivity between measurement electrodes using capacitance and electric potential. Two arc electrodes were separated by long distance and there electrodes were surrounded by additional electrodes respectively. In past research work, we carried out numerical electric analysis for calculating the capacitance and electric potential using Finite Element Method (FEM) and compared with experimental and numerical results. The capacitance values were almost agreed with experimental and numerical results. However, the electric potential values were different between experimental and numerical results in conventional studies. In this paper, we proposed an equivalent circuit including the stray capacity and measurement method for capacitance, the electric potential in space between long distance electrodes was estimated.     

Microstructure and Mechanical Properties of Mg–RE–TM Cast Alloys Containing Long Period Stacking Ordered Phases: A Review

Casting magnesium alloys hold the greatest share of magnesium application products due to their short processing period, low cost and near net shape forming. Compared with conventional commercial magnesium alloys or other Mg–RE-based alloys, the novel Mg–RE–TM cast alloys with long period stacking ordered(LPSO) phases usually possess a higher strength and are promising candidates for aluminum alloy applications. Up to now, two ways: alloying design and casting process control(including subsequent heat treatments), have been predominantly employed to further improve the mechanical properties of these alloys. Alloying with other elements or ceramic particles could alter the solidifi cation pattern of alloys, change the morphology of LPSO phases and refi ne the microstructures. Diff erent casting techniques(conventional casting, rapidly solidifi cation, directional solidifi cation, etc.) introduce various microstructure characteristics, such as dendritic structure, nanocrystalline, metastable phase, anisotropy. Further heat treatments could activate the transformation of various LPSO structures and precipitation of diverse precipitates. All these evolutions exert great impacts on the mechanical properties of the LPSO-containing alloys. However, the underlying mechanisms still remain a subject of debate. Therefore, this review mainly provides the state of the art of the casting magnesium alloys research and the accompanying challenges and summarizes some topics that merit future investigation for developing high-performance Mg–RE–TM cast alloys.     

压水堆核电厂压力容器开盖时刻主冷却剂放射性浓度控制要求研究

压水堆核电厂停堆开盖时刻主冷却剂放射性浓度限值是核电厂的重要设计参数。本文基于停堆开盖后厂内辐射风险来源分析,建立了适用于压水堆核电厂停堆压力容器开盖时刻主冷却剂中的放射性浓度控制值评估方法,并采用欧洲第三代压水堆技术方案(EPR)堆型核电厂的设计参数对建立的方法进行了验证。验证结果表明:基于此方法得出的停堆开盖限值与EPR堆型核电厂原设计较接近。     

In-situ observation of interaction between precipitates and austenite during δ→γ phase transformations

The δ-ferrite to γ-austenite phase transformation in duplex stainless steels was observed using ultra high-temperature confocal laser scanning microscope, and the orientation relationship between the γ phase, and precipitate is discussed. Owing to mutual promotion action, the γ phase was observed at δ/δ grain boundary at the beginning of δ-ferrite→γ-austenite transformation, followed by two-dimensional γ-phase growth at the same speed (0.625?µm?s^?1) along the grain boundary and into the δ grain matrix. The γ-phase growth rate decreases to 0.244?µm?s^?1 when precipitate stops growing. In the process of grain growth at high temperature, the precipitated pinning grain boundary will slow the movement speed of the grain boundary.

The mutual promotion action leads to preferential nucleation of the γ phase, and the nucleation and growth of the austenite also promoting the growth of MnS the growth.     

Evolution of properties of parts during MIM and sintering of recycled oxide particles

Metal injection moulding (MIM) is an established process for high volume production of complex shaped metallic parts using commercially available feedstocks. The characteristics of parts after moulding, debinding, and sintering cannot be simply predictable from raw materials because the properties get altered with the process parameters and the corresponding levels of porosity during processing steps. In this study, physical properties, microstructure, and mechanical properties of the MIM parts have been characterised to understand the evolution of strength during various steps in MIM processing. Feedstocks with different binder loading show a considerable difference in physical as well as mechanical characteristics. During sintering of parts which have solid loading of grinding sludge, simultaneous in situ reduction and densification takes place, whereas only densification occurs in carbonyl iron parts. It is, therefore, possible to make complex shaped parts of different levels of porosity from downgraded shop floor metallic waste.